Toby Oil Valve 7.5-24cc

THIS PART HAS BEEN DISCONTINUED BY THE MANUFACTURER AND IS NO LONGER AVAILABLE.

Toby oil control valve fitted to the Harmony 2 and 3 with 10-inch burners and Stanford 41 oil stoves, A100 and B100 Hearth Stoves and the Oxford C100. They are a brass colour with red adjustment screws for low and high fire. 

The failure rate is 0.02% and the two most common causes of problems is the metering stem sticking down or air trapped within the valve.

C2 Kerosene only. Boiler models may have a flexitemp fitted to this valve to adjust the output of the stove automatically.

It can replace the older BM and CI oil valves that are no longer available.

We recommend you read the Technical Bulletin TB115, in the document section below, for more detailed information on the Toby valve.